This is literally the most innovate and cost-effective frame available. Normally, the budget frames that are available through amazon and traditional brick and mortar retailers may not stand the test of time. Perusing the reviews of other competing options around this price point resulted in hesitation to purchase the low cost models. Reading about the design and features of this unit, i decided to take a chance on an unreviewed product. The snap frame installation and document mounting process raises the bar and will result in repeat purchases for future photo, certificate, and poster mounting needs. The included wall mounting hardware will mandate screwing the unit into the wall. The fit and finish is exceptional, as is the capability to switch out the document that you’ve installed without having to take the unit off of the wall and futz with the backing, foam, and miscellaneous items that are inherent in the design of a standard frame. As i have many more items to hang, it saddens me that this unit is now out of stock with no indication that amazon will be restocking it. For the other sizes that amazon does have in stock, do not hesitate to purchase.
Resiter’s review gave me the confidence to purchase this frame. Since there are no other reviews as of this date, i want to echo his sentiments. All you do is flip up each edge of the frame. They open like a book and stay in place while mounting the item. Then, take out the cover, insert item, replace cover, flip edges of frame to their original position and it is ready to hang. Plenty of holes on each side of the frame allow you to mount it in a variety of manners. Importantly, the item shows very well through the cover. The one thing you should be aware of is that when the frame edges close, they cover up part of the mounted item. 5” x 11” frame and approximately one-half inch of each side of the mounted item cannot be seen. In my case that is not a problem – but for some items it might be important. I am very happy with this product.
Overall i like this poster frame a lot. All four sides of the frame flip up to open so you can lay your poster inside, then you just snap them back down and you’re done. This frame hangs easily and completely flat on the wall which looks really nice. There’s only a couple things that i don’t like, the first is that the frame is flimsy so it doesn’t hold posters that have been folded as flat as i would like. Although it makes sense that it’s not a rigid frame so it can hang perfectly flat on any wall. The second thing is that you have to be careful when laying your poster in because of the design of the inside of the frame you risk damaging the edges of posters. I’d say this is the best option out there compared to spending a few hundred dollars to have something custom framed.
As another reviewer said, it truly takes only 90 seconds to frame a 2′ x 3′ poster. And it looks very professional when complete. Each edge of the metal frame flips up on hinges, allowing you to place the poster. Then install the anti-glare cover, “snap” each side back down and you’re done. Note that this is only suitable for paper artwork, maybe thin canvas–space for inserting the poster is not very thick. Was a bit pricey but a good value when compared to a 2′ x 3′ frame shop cost–and can be completed instantly.
- Pretty great for certain settings.
- I really like this poster frame. Great value and easy to change out the posters
- Excellent Quality and a Breeze to Fill and Hang
Poster Frame 20×30 Inches, Black SnapeZo 1.25″ Aluminum Profile, Front-Loading Snap Frame, Wall Mounting, Professional Series
- Enter your model number
to make sure this fits.
- PROFESSIONAL SnapeZo 20×30 FRAME FOR QUICK AND EASY CHANGE OF 20×30 POSTERS, PHOTOS, PRINTS AND PICTURES
- UNIQUE SnapeZo TRADEMARK SNAP DESIGN AND QUALITY, SUPER-WHITE BACKING, 5 YEAR WARRANTY ON METAL PARTS
- TWO SnapeZo COVERS: UV PROTECTING NON-REFLECTIVE AND A CLEAR GLOSSY PVC COVER INCLUDED | VISIBLE: 19.2 x 29.2 inches, EXTERNAL: 21.7 x 31.7 inches
- SnapeZo UNIQUE WHITE TRANSLUSCENT BACKING; GIVES YOUR POSTERS ‘POP’ – DON’T ACCEPT DULL GREY SIGN BOARD
- EASILY FIXED TO WALL WITH PROVIDED KIT PLUS MANY ALTERNATIVE INSTALLATION OPTIONS
For those who think you can build a cheaper one from scratch for your movie poster light box, don’t. Two thing i love about it:1)open from the front. So much easier than the cheaper frames or diy. 2)translucent backing- try to source a cheaper one locally is impossible-note i said cheaper. I also love how it includes both anti reflective and high gloss cover that are uv protected.
It took getting three of these to finally get one in good condition. It’s a pretty good product that is designed well, looks great, and feels solid. All of them had slight issues with the transparent plastic layer that goes over the poster but were always on the edges and remain under the frame. But it also came with two different types of plastic; one textured and one completely clear. It also came with hardware for securely (as in designed to prevent theft) mounting the frame to a wall and mounting hooks that allow easy removal from the wall. I would definitely recommend these for your posters.
Use command large picture-hanging strips http://smile. Com/dp/b00404ykzi which will hold up to 16lbs. This frame is lightweight at 8lbs so there is not any issue with the weight. My walls are solid concrete so i used 2 packs to be on the safe side. It took about 30 seconds to put the poster in. At first i thought the pvc film looked cheap but ended up loving the non glare finish. It is definitely worth the price i highly recommend it.
I’m using this one to rebuild a movie theater poster box. I also used another one of these to build a lighted poster box.
I was looking for an easy way to protect and access my new posters. I saw this item featured on amazon and was intrigued. Previously i went to hobby lobby, to compare and purchase some frames, and was totally disappointed. The frames were flimsy to say the least and they lacked supports to properly hang them up. Needless to say i left disappointed and decided to give snapezo a chance. Since this was going in my media room, i wanted it to look like the movie theater does with lighted boxes. So i built frames with lights to make the posters light up underneath. I added the snapzo on top and now it looks great. This frame not only protects my investment with a translucent overlay, but makes it easy to swap change.
Okay these are seriously cool. So all four sides of the frame are hinged. Each side snaps up, you put your picture in and the acrylic on top and snap the sides back down. Now that being said, the acrylic is chintzy. It’s textured and very, very thin. Out of the 3 frames i’ve used so far, the acrylic was scratched on two of them. I’m using them for my water colors which are bold and bright so the marks on the acrylic do not really affect them. But it seems to me that once you’ve gone to the trouble to make such a cool frame that you could do better with the acrylic. Also, they are screwed directly into the wall, which means once there you can’t easily move them somewhere else.
Perfect frame, must have for light box ??.
Was kinda pricey but completely worth it compared to other frames. Also love the snap mechanism. Ordered a second one haven’t mounted it yetupdate: got the second one on the wall… looks nice. Although plastic cover seemed somewhat damaged and doesn’t lay flat on frame, but support is already shipping me a new one :d.
I like its snapping feature, it’s nice. But it’s got a flimsy plastic sheet as “glass” which arrived scratched. The flimsy sheet also bends slightly in the frame via the effects of gravity. This distorts the photo that it’s protecting. I’ll definitely be buying an acrylic pane for the frame. I probably should have saved myself the time and just paid the same total amount for a non-budget frame. But i don’t hate it enough to be pissed that i bought it, aka a resounding meh.
I made a movie poster light box and this is perfect for the outside of it to let the light illuminate my double sided poster and it makes it real easy to change the posters out.
I used it to frame a puzzle glued onto a poster board and it worked out nicely. The only problem is that the plastic/acrylic cover seemed to be not so clear, it had an appearance of being cloudy when put over the puzzle. So just ended up tossing the plastic part. Puzzle still looks awesome in the frame.
As other reviewers have commented the entire frame is a little flimsy. It arrived in perfect shape and was not bent as others have mentioned. Itis slightly smaller than the 27×41 that a movie poster requires. I have it framing a cheap poster so i made it work, this was done by for hanging the poster over the suggested interior frame. The result is the poster looks good, but it may damage the edges of the poster in the long run. Like i said it’s a cheap poster and i would not trust this frame to my more expensive posters. I do think it looks good in the bathroom. The reflective lenses they use is slightly textured to eliminate glare on the poster. The colors on the poster don’t seem to be affected by this. Compared to $145 custom framing job it’s still a deal.
I was skeptical about finding these frames since i obtained a thing comparable on the net and they required to be changed in significantly less than a 12 months. These hold in our completed basement which is our pseudo residence theater. The structure and quality is superb. You securely screw them into the wall and the frames open up on spring loaded hinges to access the poster. In a minute you can swap them out and by no means have to choose it off the wall. The frame and other components are metallic and durable. I will be acquiring far more, you won’t be unhappy.
I bought my partner an amazing poster for his office environment and when we began pricing steel frames for it i was stunned at how costly they are. I failed to want to stick the poster in a affordable seeking plastic frame. Now only does this frame search like an expensive customized frame, it truly is tremendous effortless to set things in it, it pretty much just snaps closed. The value was way less expensive than the other solutions we appeared at, took two-three minutes tops to put everything together. I would purchase this frame once again in a heartbeat.
I’ve been wanting them for pretty a whilst. They are even far more strong than i was expecting. 25 inch to match a large strong motion picture poster point we have from blockbuster. They coordinate excellent, and the textured finish of the distinct plastic is best. We hung them up with the hangers incorporated, acquiring the simplest time incorporating a minimal piece of scotch tape to maintain it in the appropriate area on the back again of the frame to hang it more than the 2 screws placed into the wall. This could not be just as intended but how we figured it would perform finest for us. One of the posters i have in the frame is marginally bigger than 11×17. I was expecting to have to trim it, but it shut up great with it hanging above the edge on a person sidei contacted customer company for comment and dilemma and they had been valuable and nice.
I acquired two of the 24×36 inch frames for my match home, and i completely love them. The frames are pretty higher high-quality, and glimpse good. They had been also extremely quick to mount, even while i’m not the most useful with equipment. It truly is also extremely uncomplicated to switch out posters without having taking the frames down, which is great, as i can get motion picture posters cheaply and rotate them, to get a new glance from time to time. At last, the buyer provider was incredible – i emailed the seller about a element i had mistakenly thrown away in a hectic transfer-in, and the vendor responded virtually quickly and provided to send a substitution for no cost. I would totally advise this item to anyone wanting for film poster frames.
Soon after looking for close to endlessly in local craft stores to come across a adequately sized frame to mount my gishwhes signed flag and was thrilled to occur across this in this article on amazonthe frame is durable and attractive. The brushed silver appears to be like definitely good versus both of those the wall and the flag within. Mounting the flag was exceptionally basic and took about five minutes – i just put it flat on the ground, opened the sides, removed the protective plastic layer, laid the flag in, changed the plastic, then shut the sides once again. As recommended by other reviewers i mounted this on the wall with the medium sized command mounting strips. I made use of just one on every corner, a single in the middle of the major and bottom sides, and 3 alongside every single prolonged side. It was likely overkill but i experienced a 12 pack of strips so i figured why not. I positioned the sets of strips on the frame very first, then removed the backings and pressed almost everything to the wall. It really is held up superbly for about 8 months now. In general, this was a bit dear, but undoubtedly really worth it for the excellent and relieve of use.
Brilliant poster frame that holds my star wars- the power awakens 27 x forty one genuine motion picture poster excellent. Incredibly effortless to use and is not going to destruction your poster. The spring loaded sides just pop open and you lay your poster down and then the lens and snap it all shut. The poster does not transfer or shift. This is my initially front-loading poster frame and it is worthy of the cash. The blue border appears to be like wonderful and the non-glare lens definitely can help showcase your poster in a lighted home. The motive i did not give it five stars is mainly because the non-glare lens was slightly harmed during shipping, not sufficient to return the poster frame but, i was bummed when i noticed it. Total, this is a excellent poster and i would get this poster frame once more.