Signworld Telescopic Step and Repeat Backdrop Banner Stand : Great for greenscreen!

The banner stand is easy to install within 10 minutes and works as intended. The only negative is attachment of the stand to its steel bases that requires having a screwdriver availasble on site wherever you go to set it up. Other screws have knobs and can be tightened by hand.

Instead of paying all that money for a skyline or similar product, this gets the job done at a fraction of the price. Buy this and then go on ebay and find someone that can print large vinyl signs with pockets in them. This thing is easiest to setup when you have 2 people. Although it can be setup solomy only complaint is that it just feels cheap.

You do need someone to help you to put it together, that’s the one pain in the ass if you have a big banner. The bag that comes with it is not the best or strongest material. The bag will eventually rip and fall apart, we had the zipper replaced and had the bag sowed already.

Bought this from sign world. Works great, easy to set up by myself. The one i received had a defect, the screw hole on one of the feet was punched through instead of indented (the hole on the bottom was larger than the head of the screw used to attach the foot to the pole). I let the seller know and they shipped me out a new one right away. I foresee needing 1-2 more of these in the future, and will re-order when i do.

  • Adjustable, useful indoors and out
  • Instructions Please!
  • Fairly good quality!

Signworld Telescopic Step and Repeat Backdrop Banner Stand

  • Enter your model number
    to make sure this fits.
  • Ability to be used as both a single or double sided banner display unit.
  • Unique telescopic design can display banners ranging from 52″-95″ in width and from 36″-96″ in height.
  • Aluminum framed body for easy set-up and convenient transportation.
  • Two 18″ long steel base plates, entire stand is about 14 lbs total. Pole diameter is about 1.5″.
  • Could hold up large light weight banners and is well suited for any indoor trade shows or events.

What makes this stand so great is the bottom support rod. I’m using it for greenscreen. The bottom support rod enables me to secure the bottom of the screen for wrinkle-free use. It’s just sturdy enough without being too heavy and bulky. It takes a little extra time to set up, but that’s what camera assistants are for. The telescoping rods make it easy to get just the right span for what you need.

Handled custom step and repeat for a party.

I use this as a backdrop for shoutcasting and interviews at events or home. Product is easy to setup and packup. I highly recommend getting clips or just zipties to hang the banner or whatever you use. This is a great deal and a great product especially compared to similar banner stands on the market that want a lot for something that isn’t flexible.

Stand came with no instructions so it’s like putting together an erector set. The screws with the black knob are hard to screw in the first time (they must make threads in the holders). Needed pliers to screw a couple of them in all the way. Other that that, it appears to be a pretty good stand, certainly better that the one we used to have.

It was delivered on time and it was the quality expected.

This telescopic banner stand worked really great at my charity event. We had a 8′ x 8′ banner printed with our sponsors’ logos and it really worked well as a backdrop. People would stand in front of it and take pictures of it. We did use sandbags on the base of the stand to since we were outdoors just to be on the safe side since this is recommended for indoor use. The telescopic joints worked well just loosen it to extend to the desired length and tighten it. I would recommend having two people to set this up especially with really large banners. The stand comes in traveling bag along with a phillips head screwdriver to assemble the unit. You have two weighted bases which all of the poles will go into. Also you’ll get some zip ties so that you can adhere your graphic to the stand. Price point is what got me to purchase this product.

I am so thankful for this banner stand. Featuring the option for double sided displays, it allows me to advertise efficiently at my events and place promotions in front of my store. I could not be more pleased with the versatility of my purchase. I can use only one side, both sides, and i can change the size of my promotions, advertisements, and sales boards. Thankfully material is not an issue, and i have been able to use it with my vinyl, plastic, paper, and fabric advertisements. It allows me to hold these various sized banners with easy set up. If needed, i can quickly disassemble the item and place a new advertisement in a manner of minutes, or if i need to put the stand in the back, it folds conveniently into an included portable carrying case (specialized tools are also included, eliminating that headache as well). Not to mention, my wallet is quite happy with the price. By simple research one can see other similar stands are selling for a lot more, making the purchase even better.The shipping was fast, simple, and secure.

This is a fine product for light duty, but takes longer than it should to set up and would not take much abuse.

We’re using it as a background holder for our open air photo booth.

Satisfied with this purchase.

Really good value for the price. I use it mostly outside, so a strong wind can be problematic, but it doesn’t blow over in light breezes. I just use bungee cords to attach it to my car or a table if it is too windy. It can be assembled (and taken down) in about 5 minutes. The carrying case is really well designed, with bands to hold the poles, and pockets for the feet and hardware. Comes with its own screwdriver. The stand doesn’t adjust to a banner less than four feet wide. So for the banners i have that are narrower than four feet, i use short bungee cords to attach the sides of the banner to the side poles.

This is a good quality stand. Assembly directions would have made it easier to assemble.

This functions correctly for a backdrop stand. Since i was unfamiliar with how to put it alongside one another and there aren’t directions involved, i went to the signworld internet site and there is a step-by-step movie you can observe. After that, it took significantly less than 5 minutes. Plus, all the applications had been integrated.

I acquired my banner stand a couple days back and i was amazed. It really is not heavy to transportation and it was truly worth the dollars. The only factor i dislike us that the instructions consist of a blurred, drawn picture which can make it complicated to assemble if you are relying on the instruction sheet. I would counsel that 1 goes to youtube and view them assemble it. I have yet to connect my banner to it but i am guaranteed that after i do it will maintain up correctly. I would propose this product to anybody.

Not as read to assemble – but not simple. There could seriously have been some guidance provided herewe applied this as an outdoor party and weighted the ft with sandbags. The stand labored flawlessly right after a person in the viewers stepped ahead to help personnel assemble it.

We use it at all our situations so far so very good.

Summary
Review Date
Reviewed Item
Signworld Telescopic Step and Repeat Backdrop Banner Stand
Rating
4.0 of 5 stars, based on 22 reviews
Price
$61.99

One comment

  1. This review is from : Signworld Telescopic Step and Repeat Backdrop Banner Stand

    This works perfectly for a backdrop stand. Because i was unfamiliar with how to put it together and there aren’t instructions included, i went to the signworld website and there is a step-by-step video you can watch. After that, it took less than 5 minutes. Plus, all the tools were included.
    1. This works perfectly for a backdrop stand. Because i was unfamiliar with how to put it together and there aren’t instructions included, i went to the signworld website and there is a step-by-step video you can watch. After that, it took less than 5 minutes. Plus, all the tools were included.
  2. This review is from : Signworld Telescopic Step and Repeat Backdrop Banner Stand

    Not as heard to assemble – but not easy. There could seriously have been some instructions included herewe used this as an outdoor event and weighted the feet with sandbags. The stand worked flawlessly after someone in the audience stepped forward to help staff assemble it.
    1. Not as heard to assemble – but not easy. There could seriously have been some instructions included herewe used this as an outdoor event and weighted the feet with sandbags. The stand worked flawlessly after someone in the audience stepped forward to help staff assemble it.
  3. This review is from : Signworld Telescopic Step and Repeat Backdrop Banner Stand

    I received my banner stand a few days ago and i was impressed. It’s not heavy to transport and it was worth the money. The only thing i dislike us that the instructions consist of a blurred, drawn image which makes it difficult to assemble if you’re relying on the instruction sheet. I would suggest that one goes to youtube and watch them assemble it. I’ve yet to attach my banner to it but i’m sure that once i do it will hold up perfectly. I would recommend this product to anyone.
    1. I received my banner stand a few days ago and i was impressed. It’s not heavy to transport and it was worth the money. The only thing i dislike us that the instructions consist of a blurred, drawn image which makes it difficult to assemble if you’re relying on the instruction sheet. I would suggest that one goes to youtube and watch them assemble it. I’ve yet to attach my banner to it but i’m sure that once i do it will hold up perfectly. I would recommend this product to anyone.

Comments are closed.